Preventative Maintenance is VITAL to your system
Over the course of the next 12 months, your home's heating and cooling system can easily run for 3,200+ hours. Comparing that to a vehicle running at 45 miles per hour for that long of a period, you’re looking at putting the equivalent of over 140,000 miles on your unit during the next year. Performing a system tune-up at the beginning of each heating and cooling cycle is like giving your system an oil-change and making sure it's road worthy before going on a long trip.

Customers who have tune-ups performed regularly see these annual benefits:

  • Fewer Service Problems. Tune-ups prevent costly equipment breakdowns, maintain optimal efficiency and can extend the life of your equipment. They also prevent your system from breaking down during peak season when service calls take longer to get to, and the cost for repairs sky rockets.
  • Savings on Heating and Cooling Bills. According to the U.S. Department of Energy, you can save up to 10% on your utility bills just by having regular tune-ups performed on your heating and cooling system each year.
  • Safety. With gas furnaces, regular inspections can detect tiny cracks in your heating system's heat exchanger, cracks through which carbon monoxide can leak into your home. We follow strict standards, and realize the importance of safety in your home.
  • Keep Warranties Valid. Your system warranty may not be honored if your equipment is not properly maintained.

“Cool Club Membership” is offered to our loyal customers who know they can depend on us. “Cool Club Member” rates start as low as $150 per unit and only $90.00 for each additional unit. The membership benefits include the following:

  1. Two scheduled inspections per contract year (1 A/C inspection during the months of March-May, and 1 Heating inspection during the months of October-December) to be performed during the hours of 8am-5pm Monday through Friday. Should you miss an inspection, for whatever reason, we will happily roll over the inspection into the next seasons inspection block.
  2. “Cool Club Members” will receive 10% off all parts and labor on all repairs
    Priority emergency service

Our “Cool Club” Inspections include the following tasks, depending upon the unit.

Spring Tune-Up (To be performed during March-May)

Condensers (Outdoor unit)

  • Inspect unit for proper refrigerant levels with pressure gauges
  • Clean dirt, leaves and debris from inside cabinet.
  • Inspect base pan for restricted drain openings-remove obstructions as necessary
  • Check coil and cabinet
  • Inspect fan motor and fan blades for wear and damage, lubricate if necessary
  • Inspect control box, associated controls/accessories, wirings and connections for wear or damage (controls may include: contactors, relays, circuit boards, capacitors, and any other accessories.)
  • Inspect compressor and associated tubing for damage.
  • Visually inspect for oil and/or refrigerant leaks
  • Lubricate all bearings and windings as needed
  • Air-handler/Furnace & Coil (Indoor Unit)
  • Inspect blower assembly (includes blower housing, blower wheel and motor) lubricate if necessary
  • Check combustion blower housing for lint and debris, clean as necessary
  • Inspect evaporative coil, drain pan and condensate drain lines. Clean drain lines as needed
  • Inspect ignition system and safety controls-adjust as needed
  • Inspect control box, associated controls, wiring and connections.
  • Visually inspect coil for oil and/or refrigerant leaks.
  • Replace filter (When provided by owner)

Air-handler/Furnace & Coil (Indoor Unit)

  • Inspect blower assembly (includes blower housing, blower wheel and motor) lubricate if necessary
  • Check combustion blower housing for lint and debris, clean as necessary
  • Inspect evaporative coil, drain pan and condensate drain lines. Clean drain lines as needed
  • Inspect ignition system and safety controls-adjust as needed
  • Inspect control box, associated controls, wiring and connections.
  • Visually inspect coil for oil and/or refrigerant leaks.
  • Replace filter (When provided)

Other Services

  • Check refrigerant level in system using pressure gauges
  • Check safety devices and blower
  • Check expansion valve and coil temperatures and adjust system for optimum cooling
  • Check and clear drains
  • Check and calibrate thermostat
  • Visually inspect air condition for oil and refrigerant leaks
  • Lubricate all bearings, as needed
  • Change filter as needed

Fall Tune-Up (To be performed during October-December)

Condenser (Outdoor Unit)

  • Inspect unit for proper refrigerant levels with pressure gauges
  • Clean dirt, leaves and debris from inside cabinet.
  • Inspect base pan for restricted drain openings-remove obstructions as necessary
  • Check coil and cabinet
  • Inspect fan motor and fan blades for wear and damage, lubricate if necessary
  • Inspect control box, associated controls/accessories, wirings and connections for wear or damage (controls may include: contactors, relays, circuit boards, capacitors, and any other accessories.)
  • Inspect compressor and associated tubing for damage.
  • Visually inspect for oil and/or refrigerant leaks
  • Lubricate all bearings as needed

Air-handler/Furnace & Coil (Indoor Unit)

  • Clean and adjust burners and adjust controls
  • Visually adjust combustion setting for optimum fuel combustion efficiency
  • Inspect furnace for combustion/gas leaks
  • Inspect safety shut-off valves and response
  • Inspect Heat exchanger/heat kit strips
  • Inspect burner assembly-clean and adjust as needed
  • Inspect belt wear and alignment
  • Inspect ignition system
  • Inspect flue system-ensure proper attachment to the furnace, any dislocated sections, and for signs of corrosion.
  • Inspect control box, associated controls, wiring and connections
  • Check and calibrate thermostat
  • Replace filter (When provided)
  • Replace batteries in smoke detectors
  • Replace batteries in carbon monoxide detectors

Other Services

  • Clean and adjust burners and adjust controls
  • Visually adjust combustion setting for optimum fuel combustion efficiency
  • Inspect furnace for combustion, leaks, safety shut-off response, belt wear and alignment
  • Lubricate all bearings, as needed
  • Check and calibrate thermostat
  • Change filter as needed

Special Provisions

  1. This service contract provides for inspection labor only
  2. The 10% discount on parts and labor applies to repairs only. It does not apply to the change-out of a furnace, cooling coils or condensing units.
  3. Planned Maintenance Agreements are transferable at the same address only
  4. Petrocelli Services reserves the right to reject any agreement if, on inspection by the service technician, the equipment is found to be in such condition that service will be  unsatisfactory to both parties.
  5. Petrocelli Services will schedule visits on a timely seasonal basis. We will attempt to notify contract customers for scheduling.
  6. Maintenance Agreement customers shall receive labor discounts on repairs performed during unscheduled emergencies or scheduled maintenance visits.

Regulated by the Texas Department of Licensing and Regulation, P.O. Box 12157, Austin, TX  78711 (512) 463-6599

Become a “Cool Club Member”